Discover our primary lineup of original WINSOK power transistors, optimized for maximum electrical ruggedness and efficient thermal dissipation in electric scooters and power distribution units.
The modern electric scooter market is witnessing an unprecedented transition toward high-voltage architectures, targeting 48V, 60V, and 72V drivetrains. Motor controllers (often configured as Field Oriented Control - FOC or trapezoidal BLDC drivers) demand power MOSFETs that exhibit minimized conduction losses ($R_{DS(on)}$), negligible gate charge ($Q_g$), and superior thermal transient performance ($Z_{thJC}$). As sourcing complexities and lead times fluctuate globally, design engineers and sourcing directors require drop-in, cross-reference semiconductor solutions that maintain mechanical, thermal, and electrical compatibility.
Hongkong Olukey Industry Co., Limited serves as a key solution provider, specializing in providing high-reliability WINSOK MOSFET alternatives, Cmsemicon MCU microcontrollers, and complete PCBA solutions. By offering direct pin-to-pin equivalents for industry-standard packages, we enable engineers to safeguard production continuity without redesigning complex multi-layer controller boards.
Replacing a power MOSFET in a high-current electric scooter motor controller requires more than mapping the pinout. Our engineers utilize a structured hierarchy of parameters to guarantee cross-reference integrity:
Ensuring Drain-Source Breakdown Voltage ($V_{DSS}$) matches or exceeds the legacy part (typically providing a minimum 20% headroom above nominal battery pack voltage). Conduction loss targets require matching $R_{DS(on)}$ at specified gate-source voltages ($V_{GS}$) to prevent local overheating.
Total gate charge ($Q_g$) and gate-to-drain charge ($Q_{gd}$) determine the switching speed and the load placed on the gate driver IC. Improper $Q_g$ match can result in prolonged turn-on/turn-off times, leading to excessive switching loss ($P_{sw}$) and driver stress.
Direct mechanical replacement in SOP-8, DFN3X3, DFN5X6, TO-252, TO-263, and TO-220 packages is crucial. Thermal parameters, particularly Junction-to-Case Thermal Resistance ($R_{\theta JC}$), dictate the efficiency of heatsink configurations.
| WINSOK Part Number | Package | Configuration | Breakdown Voltage ($V_{DS}$) | Continuous Current ($I_D$) | Application Match Scenario |
|---|---|---|---|---|---|
| WSR90N07 | TO-220-3L | N-Channel | 72V | 84A | High-Power 48V-60V Scooter Powertrain Main Inverter |
| WSD100N15DN56G | DFN5X6-8 | N-Channel | 150V | 100A | 72V-96V Heavy Electric Scooter / Light EV Controllers |
| WSD86P10DN56 | DFN5x6-8L | P-Channel | -60V | -60A | High-Side Battery Management Protection Switches (BMS) |
| WSD6036DN33 | DFN3X3-8L | N-Channel | 60V | 50A | Compact ESC / Electric Skateboards / Auxiliary DC-DC |
| WSP4606 | SOP-8 | N+P-Channel | ±20V | 10/12A | Low-Voltage Battery Protection & LED Controller Interfaces |
HONGKONG Olukey INDUSTRY CO., LIMITED is a solution provider focusing on the overall solution of electronic product components. The main products mainly include: WINSOK MOSFET, Cmsemicon MCU, PCBA circuit board solution development and other three types of product lines.
At present, the products of Olukey Industry are widely used in automotive electronics, military electronics, smart industry, new energy, smart medical care, 5G, Internet of Things, smart home, and various consumer electronics products. Relying on the advantages of global general agents of major original factories, we are based in the Asia-Pacific market. We provide customers with various advanced high-tech electronic components by using comprehensive superior services, assist manufacturers in producing high-quality products and provide comprehensive services.
Electric scooters operate under demanding conditions, ranging from steep slopes and high-temperature urban centers to wet environments. Selecting the appropriate MOSFET configuration depends heavily on localized use cases:
Climbing steep urban grades (above 15%) forces the motor controller to run at high current draw for extended durations. High-current packages like the TO-220-3L (WSR160N20) or TO-263 provide the essential thermal capacitance to prevent rapid junction overheating and thermal runaway.
In hot desert or tropical environments, the delta temperature between the ambient air and the maximum silicon junction temperature is minimized. Lowering $R_{DS(on)}$ to the sub-milliohm level (e.g. WSD100N15DN56G) is critical to reduce internal $I^2R$ power dissipation.
During active deceleration, the motor switches to generator mode, sending energy back to the battery. This creates voltage spikes on the DC link. The MOSFET's body diode must exhibit low reverse recovery charge ($Q_{rr}$) to prevent shoot-through failures during high-frequency switching.
We use comprehensive high-quality services to provide customers with various types of advanced high-tech electronic components, assist manufacturers in producing high-quality products and provide comprehensive services. Over the years, the company has relied on reputation to survive, adhering to the tenet of "quality first, service first", and has established good cooperative relationships with many high-tech enterprises and original manufacturers at home and abroad.
WINSOK MOSFET's product voltages are mainly medium and low voltage: 15V, 20V, 30V, 40V, 60V, 80V, 100V, 120V, 150V, 200V, 250V, 300V, 400V, 500V, 600V, 650V. The main packages include DFN3X3-8, DFN5X6-8, TO-252, TO-263, SOP-8, SOT-23, TO-220, etc. There are more than 600 models and more than 40 packages. Extensive coverage of medium-voltage and low-voltage MOSFET product lines on the market.
Power electronics are shifting from traditional planar structures to advanced Shielded Gate Trench (SGT) architectures. Olukey is tracking key shifts in micro-mobility powertrain development:
SGT technology allows a significant reduction in $R_{DS(on)}$ per unit silicon area. It also helps minimize the capacitance parameters $C_{iss}$ and $C_{rss}$. This enabling cool-running controllers with smaller form factors.
Future designs must withstand inductive kickbacks without failing. WINSOK’s upcoming series guarantees 100% Unclamped Inductive Switching (UIS) avalanche testing to withstand extreme voltage stress.
Package wire-bonds are replaced by copper clips. This eliminates internal bond wire resistance, lowers parasitics, and minimizes package resistance to achieve maximum current-handling capability in DFN packages.
The global semiconductor supply chain is vulnerable to material shortages and manufacturing disruptions. Olukey leverage strategic manufacturing partnerships in China's silicon clusters to provide consistent access to components:
Relying on the advantages of global general agents of major original manufacturers, we are based on the Asia-Pacific market. Through active market development and effective resource integration, it has become one of the outstanding and fast-growing agents in the Asia-Pacific region. The company has many years of professional distribution experience.
Every WINSOK MOSFET distributed by Olukey undergoes strict quality assurance procedures to ensure performance under extreme operating conditions. We maintain the following regulatory and environmental compliance structures:
Explore our secondary array of power devices, including complementary dual channels (N+P) and specialized small-footprint surface mount (SMD) transistors designed for auxiliary systems and driver networks.
Olukey