Optimized silicon architecture supporting robust avalanche performance and low thermal resistance.
The global power tool industry is undergoing a paradigm shift, transitioning from traditional brushed AC systems to highly efficient cordless Brushless DC (BLDC) motor designs. This evolution demands compact, rugged, and low-loss semiconductor switches. Modern high-voltage and high-current power tools require MOSFETs that can handle extreme current surges, sustain massive thermal dissipation under stall conditions, and prevent parasitic switching oscillations.
In hand-held power tools, physical space is at a premium and cooling fans are often insufficient. Consequently, thermal management is paramount. By choosing MOSFETs with sub-milliohm drain-source on-resistance ($R_{DS(on)}$), power tool designers can minimize $I^2R$ conduction losses, keeping device temperatures well below the safe operating limit ($T_j = 150^\circ\text{C}$).
Equally important is the Gate Charge ($Q_g$ and $Q_{gd}$). Low gate charge allows for rapid state transitions, minimizing switching losses, particularly at PWM frequencies from 15 kHz up to 50 kHz. Achieving an optimal balance between low conduction losses and minimal switching overhead is key to extending the battery life of cordless lawnmowers, drill drivers, and hammer drills.
Integrating component supply, microcontroller technology, and circuit development services.
HONGKONG Olukey Industry Co., Limited provides a comprehensive solution for electronic product components, aligning WINSOK MOSFETs, Cmsemicon MCUs, and bespoke PCBA circuit board solutions.
Olukey Industry products are widely used in automotive electronics, new energy, industrial IoT, medical devices, smart home automation, and heavy-duty battery-powered tools.
With voltages spanning 15V up to 650V in DFN3X3-8, DFN5X6-8, TO-252, TO-263, SOP-8, SOT-23, and TO-220, we offer cross-references for major global MOSFET brands.
For international industrial buyers and power tool OEMs, supply chain resilience is a primary concern. The chip shortages and shipping bottlenecks of recent years highlight the need for stable semiconductor partnerships.
Located in the heart of Shenzhen and Hong Kong’s electronics manufacturing ecosystems, Olukey Industry leverages deep partnerships with key domestic wafer foundries and high-volume packaging plants. This regional synergy provides distinct advantages:
Transitioning to a new MOSFET manufacturer requires comprehensive technical verification. Olukey Industry supports global procurement teams with local testing and engineering assistance.
Our Field Application Engineers (FAEs) conduct detailed circuit evaluations, analyzing gate oscillations and temperature gradients directly on the client's PCBA. This hands-on engineering support bridges the gap between raw component specs and real-world system performance.
Power tools exported to European Union and North American markets must comply with stringent regulatory standards. Olukey Industry ensures that all WINSOK MOSFETs meet global environmental and safety requirements:
Different power tools subject components to different electrical stresses. Selecting the correct package and electrical profile is critical to system reliability.
These tools experience rapid current changes during impact actions. The motor drive bridge requires N-channel MOSFETs (such as the 30V-40V DFN5X6-8 or DFN3X3-8 options) that can handle high pulsed currents ($I_{DM}$). The drive stage must dissipate heat efficiently. The low thermal resistance from junction to case ($R_{thJC}$) of WINSOK's DFN packages allows heat to quickly escape to the ground plane, preventing thermal runaway.
Electric lawnmowers, chainsaws, and leaf blowers operate at higher battery voltages (36V to 82V) to deliver standard gas-equivalent power while keeping currents manageable. For these applications, 60V, 80V, and 100V MOSFETs in TO-252, TO-263, or TO-220 packages (such as WSF12N10 or WSF40N04) are ideal. High avalanche energy ratings ($E_{AS}$) are critical to handle voltage spikes generated by sudden grass or branch stalls.
Power tool battery packs require dedicated protection circuits to prevent over-charge, over-discharge, and short-circuit conditions. Back-to-back N-channel or P-channel MOSFETs control the charge and discharge paths. WINSOK's dual-channel series (like the WSD3810DN33 or WSD2022DN33) helps designers reduce BMS footprint while maintaining high current capacity.
Technical and procurement answers from our engineering experts.
Medium and high voltage switches featuring robust avalanche ratings and high thermal transfer packages.
Olukey