High-performance power switching components selected for Indonesian residential induction hobs and localized smart appliance control units, guaranteeing durability under varied grid voltages.
Low resistance switching element designed for domestic IH control circuits in Southeast Asia.
Ultra-compact SOT-723-3L package optimizing driver spaces in high-density IoT heating plates.
High current carrying P-channel MOSFET providing dynamic reverse polarity protection in IH devices.
Heavy-duty 100V P-channel silicon offering high reliability in harsh industrial power environments.
Indonesia, the largest economy in Southeast Asia, is currently undergoing a massive structural shift under the "Making Indonesia 4.0" national initiative. Traditional fossil-fuel-based heating systems across the country's main industrial hubs, such as Karawang, Bekasi, and Surabaya, are steadily being replaced by clean, highly energy-efficient Electromagnetic Induction Heating (IH) technologies. This transition is motivated not only by global decarbonization mandates but also by local economic realities: industrial electricity infrastructure in Java and Bali has matured, making high-efficiency electric induction vastly more cost-effective than volatile LPG or heavy fuel oils.
From heavy metal casting and steel manufacturing in Banten to precision plastics extrusion in Cikarang, Indonesian manufacturing plants require high-reliability electromagnetic induction components. These induction systems depend on power semiconductors capable of high-frequency switching, minimal thermal energy dissipation, and stability against power grid fluctuations common in remote regions. As a key global semiconductor provider, Olukey Industry, in partnership with Winsok MOSFET, has established a localized distribution channel to meet this rising industrial demand.
The Indonesian government's electric stove initiative pushes for localized manufacturing of household induction cooktops, demanding high-efficiency SOT-23 and DFN MOSFET controllers.
Induction barrel heaters in West Java's massive packaging and plastics sector require sustained switching loads that only high-current TO-220 & TO-252 transistors can support.
Sourcing robust, high-voltage switching components helps Indonesian smelting units run at 95% thermal efficiency compared to traditional gas furnaces.
Electromagnetic induction heating works by passing a high-frequency alternating current through an electromagnet (induction coil). This creates a dynamic electromagnetic field that penetrates the metallic vessel, generating eddy currents within it. Due to the electrical resistance of the metal, these eddy currents produce localized heat rapidly.
The core efficiency of this process is governed by the Inverter Circuitry. The inverter switches the current at frequencies ranging from 20 kHz to over 100 kHz. To achieve this without catastrophic power loss, system designers must source MOSFETs with low Drain-Source On-State Resistance ($R_{DS(on)}$) and fast switching parameters. Furthermore, the controller—typically a high-performance microcontroller unit (MCU)—must execute precise Pulse Width Modulation (PWM) to regulate temperature accurately.
Winsok MOSFETs are engineered with advanced trench technology, minimizing both conduction losses and gate charge ($Q_g$), which are essential for zero-voltage switching (ZVS) resonant topologies widely used in modern IH induction cookers.
For manufacturing plants in Jakarta, Surabaya, or Medan, maintaining a consistent supply of semiconductor components is a primary concern. The global supply chain disruptions of recent years highlighted the risks of over-reliance on single-source suppliers. China’s advanced Industry 4.0 electronics manufacturing ecosystems have stepped up to provide unprecedented reliability, blending massive capacity with strict quality controls.
As a premier global distributor, Hong Kong Olukey Industry Co., Limited acts as a direct bridge between these state-of-the-art Chinese manufacturing lines and buyers across Indonesia and the wider Asia-Pacific region. By managing inventory strategically and maintaining global general agency agreements with original manufacturers like Winsok and Cmsemicon, Olukey provides Indonesian industrial partners with guaranteed lead times, direct technical support, and extensive product selection.
These high-voltage N-channel and dual N+P-channel MOSFET configurations provide key switching functions for industrial induction machinery, commercial kitchen woks, and automated packing equipment.
Complementary dual N+P arrangement ideal for compact H-bridge drivers in automated heating feeders.
300V low-current high-speed switch designed for precision packaging thermal sealing bars.
TO-220 high-current capability handling up to 180A, ideal for heavy agricultural drying machinery.
Ultra-low on-resistance DFN package maximizing space and thermal performance in heavy smelt-inverters.
Electromagnetic induction heating is not a one-size-fits-all solution. In Indonesia, the geographical and infrastructural diversity of the islands requires specialized localized engineering implementations:
Commercial kitchen environments in metropolitan areas require high-power induction woks to replace high-cost LPG. These systems run continuously for 12+ hours daily under high humidity. They require TO-220 package MOSFETs like the WSR200N08, which features a robust thermal tab to prevent thermal runaway.
Sumatra’s coffee and Sulawesi’s cacao processing plants are adopting electromagnetic air heaters for crop drying. Unlike gas burners, IH systems allow for precise temperature control, preserving product quality. These systems are powered by multi-phase resonant converters driven by reliable microcontrollers like the CMS32H6157.
Automobile assembly plants in Karawang rely on induction hardening and heat-treating for gears and drive shafts. The precision required for hardening processes demands high-frequency, high-current switching components capable of handling rapid thermal cycling.
HONGKONG Olukey INDUSTRY CO., LIMITED is a leading solution provider focusing on the supply and integration of advanced electronic components. Our product portfolio spans three core lines: WINSOK MOSFETs, Cmsemicon MCUs, and custom PCBA circuit board solutions.
Currently, our products are widely utilized in automotive electronics, industrial automation, renewable energy systems, smart medical appliances, 5G infrastructure, IoT networks, smart home appliances, and consumer electronics. Leveraging our status as a global general agent for major original semiconductor factories, we focus on serving the Asia-Pacific market. We help manufacturers improve product quality and reliability through comprehensive technical support, reliable logistics, and engineering consultation.
Relying on direct factory relationships, we serve as an agile semiconductor distributor in the Asia-Pacific region. We support our customers through:
Sourcing managers at Indonesian factories often face challenges with long lead times, poor technical support, and volatile pricing. Olukey addresses these challenges by keeping local inventory and providing dedicated engineering support.
Whether you are designing a high-density consumer induction cooker or a multi-kilowatt industrial metal furnace, our engineers help you select the optimal MOSFET package for your layout. This ensures proper thermal performance and prevents premature field failures under high load.
Get expert answers regarding high-frequency electromagnetic heating design, MOSFET selection, and supply chain logistics.
In induction heating, MOSFETs switch heavy currents at high frequencies (up to 100 kHz). The power loss dissipated as heat within the silicon is directly proportional to the Drain-Source On-State Resistance ($R_{DS(on)}$). Selecting a MOSFET with low $R_{DS(on)}$ reduces thermal build-up, allowing smaller heat sinks and improving the reliability of the induction heating system.
Indonesia's high ambient temperatures and humidity put additional stress on electronic components. Standard packages can experience thermal overload under sustained use. We recommend using DFN5X6-8 or TO-220 packages with high thermal efficiency ($R_{\theta JC}$), combined with conformal coating on the PCBA, to prevent moisture-related faults.
Yes. Winsok MOSFETs and Cmsemicon MCUs offer pin-to-pin compatibility and comparable performance metrics to Western brands, typically at lower cost and with shorter lead times. This makes them a practical option for manufacturers looking to optimize their supply chain.
Standard in-stock component orders ship from our Hong Kong hub and reach major industrial centers in Java within 5 to 7 business days. For customized PCBA runs or out-of-stock items, lead times typically range from 3 to 4 weeks, including quality validation.
Explore our range of high-efficiency MOSFETs and microcontrollers, optimized for power switching and control logic in induction heating applications.
High density DPAK design suitable for motor drivers and induction barrel heaters.
Robust P-channel device designed for reliable low-voltage control circuits.
TO-220 through-hole package offering solid thermal dissipation under high loads.
High current 200A capability designed for heavy-duty industrial heating controllers.
Dual N-channel configuration for space-constrained signal routing boards.
High voltage P-channel silicon designed for industrial processing and automation.
ARM core microcontroller providing precision PWM signals for induction cookers.
Robust P-channel device designed for automotive and industrial power applications.
Get in touch with Olukey's technical sales team to request data sheets, obtain engineering samples, or schedule a design review for your custom PCBA designs.
Olukey